Want to Green Your Supply Chain? Start at the Bottom - With Your Pallets
Wed, 10 Jun 2009, 15:35:27 EDT — Edited by Carly Zander
VINELAND, N.J. (SEND2PRESS NEWSWIRE) -- Most people believe change starts at the top. But when it comes to greening your supply chain, change really starts at the bottom - with your choice of pallets. That's what Michael Smith, C.O.O. of PALNET, a nationwide supplier of environmentally-friendly wooden pallets, believes. And he should know, he's been in the pallet business for more than 20 years.

Pallet Buyers Need to be Aware of 'Voodoo' Environmental Claims, says PALNET USA
Wed, 20 May 2009, 17:35:09 EDT — Edited by Carly Zander
VINELAND, N.J., May 20 (SEND2PRESS NEWSWIRE) -- The pallet industry has begun to promote green and with that, environmental claims are sprouting up everywhere, cautions PALNET. A 2008 study conducted by Price Waterhouse found that consumers only believe 16 percent of environmental claims. There's a good reason why. Of 1,753 environmental claims researched last year, all but one were either false or misleading, according to the State of Green Business report.

Mueller Offers a Metal Building to a Deserving Texas Non-Profit Organization
Mon, 27 Apr 2009, 08:00:51 EDT — Edited by Carly Zander
BALLINGER, Texas, April 27 (SEND2PRESS NEWSWIRE) -- Mueller, Inc., a leading manufacturer of steel buildings and residential metal roofing, wants to extend a helping hand to a Texas non-profit in need of a new facility. One organization will be chosen to receive a new Mueller steel building through applications submitted by June 1, 2009.

Plastic or Wood Pallets: Which is Greener? Debunking the Environmental Myth of Plastic Pallets
Wed, 15 Apr 2009, 07:59:45 EST — Edited by Debra Tone
VINELAND, N.J., April 15 (SEND2PRESS NEWSWIRE) -- Michael Smith, President and C.O.O. of PALNET, a leading nationwide supplier of shipping pallets, issued a statement today regarding the environmental impact of plastic versus wood pallets. According to Smith, 'For all the green rhetoric being tossed around today by the manufacturers of plastic pallets about their sustainability and recyclable nature, the facts are still the facts.'

Inventek Releases a SiRFstarIII(TM) 20 Channel OEM GPS Module with a True 5 Hz Update Rate
Mon, 30 Mar 2009, 18:00:13 EST — Edited by Carly Zander
WESTFORD, Mass., March 30 (SEND2PRESS NEWSWIRE) -- Inventek Systems, the leading manufacturer of low cost, highly accurate OEM GPS modules, has developed a dual UART GPS with SiRF binary outputting position, velocity and time at 5 times per second without interpolation. Offering real time GPS updates, this compact 18 mm x 18 mm GPS module is ideal for high-velocity, high acceleration applications and is based on the SiRFstarIII(TM) architecture.

Aicello Acquisition of Tohcello PVA Film Business Group
Thu, 19 Mar 2009, 07:59:35 EST — Edited by Debra Tone
VANCOUVER, BC, Canada, March 19 (SEND2PRESS NEWSWIRE) -- Aicello announced today an agreement to acquire Tohcello Company's polyvinyl alcohol (PVA) film product line and assets. The move is part of Aicello's strategy to expand PVA film business as a core product offering, by increasing production capacity and leveraging the assets and technology included in the acquisition. The sale will be completed on April 1, 2009.

Kawasaki Selects Stens, LLC for Canadian Distribution of Engines and Handheld Power Products
Tue, 20 Jan 2009, 06:00:13 EST — Edited by Carly Zander
GRAND RAPIDS, Mich., Jan. 20 (SEND2PRESS NEWSWIRE) -- The Engines and Power Products Division of Kawasaki Motors Corp., U.S.A., will initiate a new distribution arrangement for Canada, effective this week. Stens, LLC, headquartered in Jasper, Ind., will become the distributor of Kawasaki-branded replacement engines and handheld power products to a network of more than 500 independent dealers in Canada.

LRM Industries, LLC(TM) to Produce Composite Railway Systems Components
Thu, 11 Dec 2008, 06:30:16 EST — Edited by Debra Tone
ROCKLEDGE, Fla., Dec. 11 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC(TM), headquartered in Rockledge, Florida, has been selected by Eastern Rail Corporation to manufacture thermoplastic composite infrastructure components for the nation's electric railways. LRM's proprietary, totally automated TPF ThermoPlastic Flowforming(TM) process will be used to mold long fiber reinforced thermoplastic composite components for a durable replacement of aging or damaged railway structures made of wood, steel or traditional fiberglass.

Philatron International Awarded 2008 Medium Size Family Owned Business of the Year
Thu, 04 Dec 2008, 17:12:16 EST — Edited by Carly Zander
ORANGE COUNTY, Calif., Dec. 4 (SEND2PRESS NEWSWIRE) -- Philatron International and CEO, Founder, and Owner, Phillip M. Ramos, Jr. were honored with yet another award for its outstanding business. On November 19th, Orange County Business Journal (OCBJ) awarded Philatron International, Medium Size Family Owned Business of the year. During the 9th annual business award ceremony OCBJ recognized the company for its commitment to helping outside community organizations through charity.

LRM Industries, LLC Launches New Sheetless Thermoforming Production
Tue, 28 Oct 2008, 05:50:15 EDT — Edited by Carly Zander
ROCKLEDGE, Fla., Oct. 28 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC, headquartered in Rockledge, Florida, announces a new innovative production line, custom designed for the unique, patent-pending STF Sheetless ThermoForming(TM) technology, which was invented by LRM in 2007.

Kawasaki Announces Major Personnel Moves at Engines and Power Products Division
Wed, 08 Oct 2008, 11:00:22 EDT — Edited by Carly Zander
GRAND RAPIDS, Mich., Oct. 8 (SEND2PRESS NEWSWIRE) -- Katsuyuki (Kent) Murakami, general manager of Kawasaki Motors Corp., U.S.A.'s Engines and Power Products Division based here, announced that he will retire effective the end of this year. He will be replaced by Yoshiteru (Yoshi) Ueda, who headed the research and development program at Kawasaki Motors Manufacturing Corp., U.S.A.'s Maryville, Mo. production facility. Ueda has been with Kawasaki Heavy Industries, Ltd. since 1972.

Million Dollar Expansion at Syntec Optics Supports Focus on Innovation
Tue, 30 Sep 2008, 12:16:42 EDT — Edited by Carly Zander
PAVILION, N.Y., Sept. 30 (SEND2PRESS NEWSWIRE) -- Syntec Optics, recipient of the prestigious 2008 Frost & Sullivan Growth Excellence Award in the North American polymer optics market, announces new manufacturing capacity that directly correlates with its focus on innovation. Syntec is also actively seeking more staff. To quote the Frost and Sullivan award, 'Syntec Optics, through its commitment to innovation and consistent focus on profitability, is rapidly growing at an average annual growth rate of 16-percent."

Syntec Optics Granted U.S. Patent for Innovative HRDT Technology
Tue, 09 Sep 2008, 10:29:33 EDT — Edited by Carly Zander
PAVILION, N.Y., Sept. 9 (SEND2PRESS NEWSWIRE) -- Syntec Optics, the largest independent manufacturer of custom plastic optics in North America, has been granted a U.S. patent for its HRDT(TM) (High Refraction Diamond Turning) technology, in production use since late 2005. Most Syntec HRDT projects have been defense-related. However, HRDT holds promise for other markets, such as datacom, that require asymmetric, low-cost optics with high wave sensitivity and strong heat resistance, and share with defense an imperative to shave development cycles.

Wordingham Technologies Adds Online Support for Supply Chain Management
Wed, 30 Jul 2008, 13:04:04 EDT — Edited by Carly Zander
ROCHESTER, N.Y., July 30 (SEND2PRESS NEWSWIRE) -- Wordingham Technologies, specialists in custom machined parts for optics, photonics and precision instrumentation, announces online customer access for tracking orders and managing releases, 24/7. The Wordingham Quality (WQ) Portal, the first of its kind in this industry, demonstrates Wordingham's commitment to 'quality delivered.'

Synthetic Ice Brings Olympic Experience to North Carolina Kids
Tue, 24 Jun 2008, 13:49:24 EDT — Edited by Liisa Sullivan
GREENVILLE, S.C., June 24 (SEND2PRESS NEWSWIRE) -- Ice Rink Engineering is making it possible for kids to enjoy hands-on hockey play this summer at the Marbles Kids Museum in Raleigh, N.C. The Marbles Kids Museum will be opening their Marbles Olympics summer exhibit, featuring the EZ Glide 350(TM) synthetic ice rink as Center Ice on July 12. The games will take place through August 24.

New Tile Testing Laboratory
Mon, 19 May 2008, 14:19:52 GMT — Edited by Carly Zander
LYNN, Mass., May 19 (SEND2PRESS NEWSWIRE) -- Trusty-Step International, a manufacturer of slip-resistant floor chemicals, announces the opening of their new tile testing laboratory. The new laboratory will test all types of hard mineral surfaces, including tile, marble, granite, etcetera.

Bantam Electronics(TM) Awarded JBM Electronics Compact Wireless Router Manufacturing
Mon, 12 May 2008, 11:02:57 GMT — Edited by Carly Zander
AUSTIN, Texas, May 12 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc., a leading provider of high-mix electronics manufacturing services, including custom systems manufacturing and supply chain management for emerging OEM companies and electronic products, today announced a product manufacturing agreement with JBM Electronics. JBM is a leading provider of solutions that interface legacy protocol devices to modern LAN/WAN networks.

Brighten Up Your Yard with Resin Furniture
Mon, 05 May 2008, 14:18:54 GMT — Edited by Carly Zander
PORTERSVILLE, Pa., May 5 (SEND2PRESS NEWSWIRE) -- Stacking resin chairs and tables from Adams Mfg have many advantages over other, more expensive options for the patio. They're strong, comfortable, and easy to store when they're not being used. And, they are all 100-percent recyclable. Now, with bright new colors and styles to choose from, they are the best option for the porch, patio, or deck.

There Are All Kinds of Resin Furniture - Which One Works Best for You?
Mon, 21 Apr 2008, 14:02:11 GMT — Edited by Carly Zander
PORTERSVILLE, Pa., April 21 (SEND2PRESS NEWSWIRE) -- Adams Mfg Corp asks, 'Which colors are best?' For the big, comfortable resin chaise lounges, white is the best color. Dark colors absorb heat more quickly, and can be uncomfortable to use on sunny days. Anyone who's sat on a hot chaise lounge while wearing a bathing suit will insist that their chaise lounges be white and only white.

How to Select the Best Resin Chair
Tue, 01 Apr 2008, 13:44:17 GMT — Edited by Carly Zander
PORTERSVILLE, Pa., April 1 (SEND2PRESS NEWSWIRE) -- Adams Manufacturing has discovered that many consumers want to know more about which resin chair is best for them. Basically, all stacking resin chairs come in three sizes. The smallest are called low-backs. They're the most economical. They're usually about 31 inches high at the back, and they weigh about five pounds.

LRM Industries, LLC Launches New Web Site
Fri, 28 Mar 2008, 01:05:37 GMT — Edited by Carly Zander
ROCKLEDGE, Fla., March 28 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC, a manufacturer of large plastic and composite structures headquartered in Rockledge, Florida, announces the launch of a new website. The site has a new design and new content, reflecting the expanding offering of LRM's rapidly growing portfolio of technology and products to improve the competitiveness, utility and versatility of large plastic structures in many markets.

F and M Tool and Plastics Announces Opening of Smartware Products Division
Tue, 18 Mar 2008, 11:09:15 GMT — Edited by Carly Zander
FRESNO, Calif., March 18 (SEND2PRESS NEWSWIRE) -- F & M Tool and Plastics Inc., in Leominster Mass., a molding firm specializing in manufacturing eco friendly products, has announced the opening of Smartware Products, a division of F & M Tool and Plastics, a sales and distribution center in the Central Valley of California.

TJ's Custom Jeans announces the Move of Their State of the Art Manufacturing Facility and Customer Service Center
Thu, 13 Mar 2008, 09:55:58 GMT — Edited by Carly Zander
PARRAS, COAHUILA, Mexico, March 13 (SEND2PRESS NEWSWIRE) -- TJ's Custom Jeans (Tailormade Jeanswear Ltd.), the global leader in made-to-measure jeans and chinos, has relocated their facilities to Parras, Mexico. The choice of move to Parras de la Fuenta is significant in that the town which is considered an oasis in the desert has 2 premium quality denim mills and boasts a 100 year old history of weaving denim fabric and sewing jeans.

NoblePeak Vision Hires New CEO for Next Phase of Business Development
Wed, 09 Jan 2008, 12:00:35 GMT — Edited by Carly Zander
WAKEFIELD, Mass. - Jan. 9 (SEND2PRESS NEWSWIRE) -- NoblePeak Vision announced today that Mike Decelle has joined the company as President and Chief Executive Officer. Decelle takes the reins from co-founder Cliff King, bringing 25 years of experience to NoblePeak with demonstrated leadership capabilities and success in both startup and large public companies.

New Mexico-based Jewelry Manufacturer finds Room to Grow
Thu, 27 Dec 2007, 09:30:52 GMT — Edited by Carly Zander
ALBUQUERQUE, N.M. - Dec. 27 (SEND2PRESS NEWSWIRE) -- Relios, America's largest manufacturer of natural lifestyle designer jewelry has more than doubled its size with a move into a 25,000-square-foot facility in Albuquerque. The move also means that Relios has also more than doubled its production capacity - allowing the major jewelry supplier to expand services to its more than 500 customers.

Bantam Electronics(SM) Adds Engineering Design and NPI Services, Increasing Focus on Accelerating Customer Time to Market
Fri, 14 Dec 2007, 09:29:22 GMT — Edited by Carly Zander
AUSTIN, Texas - Dec. 14 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc., a leading provider of high mix electronics manufacturing services, including custom systems manufacturing and supply chain management for emerging OEM companies and electronic products, today announced the addition of engineering design and new product integration (NPI) services to its customer offering.

Bantam Recognized in 2007 Inc. 5000
Mon, 05 Nov 2007, 12:34:22 GMT — Edited by Carly Zander
NEW YORK, N.Y. and AUSTIN, Texas - Nov. 5 (SEND2PRESS NEWSWIRE) -- Inc. recognized Bantam Electronics, Inc., a leading provider of high mix electronics manufacturing services for emerging companies, on its inaugural Inc. 5,000 list of the fastest-growing private companies in the country. The Inc. 5,000, an extension of Inc. magazine's annual Inc. 500 list, catches many businesses that are too big to grow at the pace required to make the Inc. 500.

DaveCo Achieves AS9100 Certification
Tue, 16 Oct 2007, 15:59:00 GMT — Edited by Carly Zander
GARLAND, Texas - Oct. 16 (SEND2PRESS NEWSWIRE) -- DaveCo Industries recently demonstrated its commitment to quality and continuous improvement by achieving certification to AS9100, which has been adopted as the quality standard for the Aerospace Industry. Shortly after the recent certification audit of DaveCo's management system and processes, the company received an audit score of 98.3. DaveCo is now officially certified to AS9100 and ISO 9001:2000.

Stabilus Appoints Anthony Haba to President
Mon, 08 Oct 2007, 18:32:00 GMT — Edited by Debra Tone
GASTONIA, N.C. - Oct. 8 (SEND2PRESS NEWSWIRE) -- Stabilus, the world market leader in the design and manufacture of gas springs and hydraulic dampers, has appointed Anthony 'Tony' Haba as President Stabilus Inc. Mr. Haba will be responsible for Stabilus business operations in the North American market with facilities in North Carolina, Mexico and Michigan.

Seattle-based CNT Technologies Promises Aircraft, Automobiles and Space Vehicles That are Lighter, Stronger, and More Fuel Efficient
Thu, 09 Aug 2007, 17:50:00 GMT — Edited by Carly Zander
SEATTLE, Wash. - Aug. 9 (SEND2PRESS NEWSWIRE) -- CNT Technologies, Inc. announced today its recent carbon nanotube fiber award from MICRO NANO 25 as 'one of the most innovative products of 2007' selected by the editors of R&D Magazine and MICRO/NANO Newsletter. CNT-Technologies is the leading producer of carbon nanotube fiber.

SIL-2 Safety Certified Fire and Gas Detection System
Tue, 31 Jul 2007, 15:40:00 GMT — Edited by Chris Simmons
MINNEAPOLIS, Minn. - July 31 (SEND2PRESS NEWSWIRE) -- Detector Electronics Corporation (Det-Tronics) today announced the release of a fire and gas detection system certified for applications to Safety Integrity Level 2 (SIL-2) by the globally-recognized certification agencies exida and TuV Nord.

New Engine Design Becomes Talk of The Industry, Promises Unparalleled Performance
Tue, 10 Jul 2007, 23:00:00 GMT — Edited by Carly Zander
LAS VEGAS, Nev. - July 10 (SEND2PRESS NEWSWIRE) -- Mr. Hefley, CEO of the Hefley Engine Company, has announced a new more efficient engine. The current automotive engine design developed over 125 years ago is no longer capable of delivering the performance and economy demanded in tomorrow's automobiles. The Hefley engines are clean burning, extremely efficient and environmentally friendly.

A Crystal Clear Future, Glass Plus(R) in Water Soluble Bags
Tue, 01 May 2007, 14:10:00 GMT — Edited by Chris Simmons
VANCOUVER, B.C., Canada - May 1 (SEND2PRESS NEWSWIRE) -- Aicello today announced commercialization of a new water soluble film utilized in Reckitt Benckiser's Glass Plus(R) Dissolvable Refills. The Glass Plus(R) package is the first North American consumer application of refill pouches. It allows both cost and source reduction, while consumers will find price savings in a convenient, user friendly package.

HVT Triples DLP Light Engine Repair and Recycling Capacity
Mon, 08 Jan 2007, 15:40:00 GMT — Edited by Carly Zander
NORCROSS, Ga - Jan. 8 (SEND2PRESS NEWSWIRE) -- Hong Video Technology, Inc. (HVT) is pleased to announce the completion of its expanded and renovated electronics display repair facility, including construction of a large darkroom that more than triples its capacity for alignment and testing of digital light processing (DLP) light engines.

GeckoSystems, Inc. Appoints New Senior Management
Thu, 30 Nov 2006, 13:49:00 GMT — Edited by Chris Simmons
WASHINGTON, D.C. - Nov. 30 (SEND2PRESS NEWSWIRE) -- GeckoSystems, Inc. (OTC: GKSY / GKSY.pk) is pleased to announce that the Board of Directors has appointed Mr. Neil T. Wallace to the position of Vice President, Legal and Public Affairs. Mr. Wallace holds a J.D. and an economics degree and has held several senior management positions domestically.

Emission Control Technology Destroys 91-percent of Methyl Bromide in Commercial Demonstrations
Wed, 18 Oct 2006, 17:29:00 GMT — Edited by Chris Simmons
BRIDGEPORT, N.J. - Oct 18 (SEND2PRESS NEWSWIRE) -- Value Recovery Inc., an environmental technology company, announced the results of its most recent emissions control demonstration for instantaneously destroying Methyl Bromide. Value Recovery proved the destruction of 91% of methyl bromide emissions from fumigation operations using its new breakthrough technology that employs a non-hazardous, water-based scrubbing system.

International Shoe Manufacturing Corporation Completes Acquisition of GeckoSystems, Inc.
Thu, 12 Oct 2006, 16:22:00 GMT — Edited by Chris Simmons
WASHINGTON, D.C. - Oct. 12 (SEND2PRESS NEWSWIRE) -- International Shoe Manufacturing Corporation (OTC: ISHO / ISHO.pk) announced today that they have completed the acquisition of GeckoSystems, Inc. GeckoSystems, based in Conyers (Atlanta), Georgia, is now entering its ninth year of business. GeckoSystems is a dynamic leader in the Robotic Industry revolutionizing the development and usage of mobile robot solutions for safety, security and service(TM).

Electronic Development Solutions Announces an Advancement in Sidewall Pinhole Detection for Formed Foils Used in Pharmaceutical, Medical and Food Packaging
Tue, 10 Oct 2006, 19:36:00 GMT — Edited by Chris Simmons
TAMPA, Fla. - Oct. 10 (SEND2PRESS NEWSWIRE) -- Electronic Development Solutions, Inc announces the latest version of its Alumivision pinhole detector line. The Alumivision MDA provides sidewall pinhole inspection of formed cavities and reduces material waste when compared to conventional systems.

New Soft Gel Manufacturer Gel Smart Delivers a Unique Blend of Experience, Design Savvy and Production Economies
Wed, 02 Aug 2006, 16:25:00 GMT — Edited by Chris Simmons
WHIPPANY, NJ - Aug. 2 (SEND2PRESS NEWSWIRE) -- Specialty gel producer Poly Gel LLC has launched a new company dedicated to providing a fully integrated source of soft gel supply and finished products to specification for OEM and private label manufacturers. Operating as a joint venture between POLY-GEL and a long-standing production partner in Taiwan, Gel Smart is structured to deliver highest-quality raw materials and products at very competitive prices.

Syntec Technologies and RTM Merge to Form Syntec Optics
Mon, 31 Jul 2006, 19:54:00 GMT — Edited by Chris Simmons
PAVILION, NY - July 31 (SEND2PRESS NEWSWIRE) -- Syntec Technologies, the largest independent manufacturer of custom polymer optics in North America, and its subsidiary, Rochester Tool and Mold (RTM), announce they have merged under the name Syntec Optics, a name clarifying their strong commitment to innovative optics.

Polygal Announced Energy Advanced Glazing
Fri, 21 Jul 2006, 18:32:00 GMT — Edited by Christopher L. Simmons
CHARLOTTE, NC - July 21 (SEND2PRESS NEWSWIRE) -- Polygal Plastics Industries Ltd., the world leader in the design, manufacture and marketing of Polycarbonate and Polypropylene structured sheets and advanced glazing systems has announced its energy-advanced Polycoolite(TM) is now available in Triple Wall, 16mm sheets for skylights and solarium environments.

New Partnership, Bantam Electronics(SM) Assumes Operational Hardware Manufacturing for Acequia
Wed, 05 Jul 2006, 20:33:00 GMT — Edited by Christopher L. Simmons
AUSTIN, TX - July 5 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc. a leading provider of custom manufacturing solutions for OEMs, as well as end-to-end supply chain services, today announced its strategic partnership with Acequia, L.P. Acequia is a leading provider of irrigation water conservation solutions to local and nationally based commercial property owners.

Intellikey Labs HD-DVD Quality Assurance Disc Testing in High Gear
Mon, 08 May 2006, 16:59:00 GMT — Edited by Carly M. Zander
BURBANK, CA - May 8 (SEND2PRESS NEWSWIRE) -- The mid-April release of HD-DVD players and software on the retail market kicked the production of high definition entertainment product into gear. The media industry's need for HD-DVD titles for retail distribution has been keeping Intellikey Labs' optical content testing in overdrive to meet studio release dates.

Kubota Research Announces P-Wave(TM) MemBond(TM) and Collaborates with Ion Power, Inc. to Accelerate Fuel Cell Research
Thu, 04 May 2006, 07:00:00 GMT — Edited by Christopher Laird Simmons
HOCKESSIN, DE - May 4 (SEND2PRESS NEWSWIRE) -- Kubota Research Associates, Inc., headquartered in Hockessin, Delaware, announces P-Wave(TM) MemBond(TM), a revolutionary waterproof bonding process for the assembly of fuel cells, based upon the patented P-Wave(TM) technology, which clears major performance and cost obstacles to the manufacture of commercially viable fuel cells.

The 'Revolution' in Personal Hydration is Here Now - Using the Not-A-Bottle(TM) Container System
Thu, 27 Apr 2006, 21:22:00 GMT — Edited by Christopher Laird Simmons
ESTES PARK, CO - Apr. 27 (SEND2PRESS NEWSWIRE) -- Rocky Mountain Patents, LLC (www.RockyBusiness.com) today announced that its innovative Not-A-Bottle(TM) container system is poised to revolutionize the personal hydration market. 'The Revolution in personal hydration is here now! Instead of attempting to clean out permanent pouch systems, drinking bottles, or canteens, the Not-A-Bottle(TM) container system with a drinking tube or pop-up cap provides 'Instant Refill' by simply replacing the beverage bag,' says Charles Schroeder, Manager.

Princeton Disc Appoints Avi Itzhakov as CEO and Partner
Tue, 18 Apr 2006, 15:49:00 GMT — Edited by Liisa Sullivan
POINT PLEASANT BEACH, NJ -- Apr. 18 (SEND2PRESS NEWSWIRE) -- Princeton Disc has announced its appointment of Avi Itzhakov to the position of Chief Executive Officer. Mr. Itzhakov has served as Princeton Disc's Chief Operating Officer since January of 2001, and has been Director of Operations since 1999. He will also join Princeton Disc's Board of Directors and assume partnership in the corporation.

Syntec Expands Optical Diamond Turning Center to Give Defense Clients New Options
Mon, 17 Apr 2006, 17:27:00 GMT — Edited by Christopher Laird Simmons
PAVILION, NY - Apr. 17 (SEND2PRESS NEWSWIRE) -- Syntec Technologies, the largest independent custom plastic optics manufacturer in the US, has added a state-of the-art Nanotech 250 Diamond Turning Lathe at its wholly owned subsidiary, Rochester Tool and Mold. Rochester Tool and Mold is one of very few facilities worldwide with expertise in both opaque and optical molds. As an integral part of delivering this expertise, it offers full single point diamond turning as well as HRDT(TM), its patent-pending process for high refraction diamond turning.

Nano Superlattice Technology, Inc. Announces the Retainer of Festo AG & Co. to Construct Sophisticated Robotic Automation Insertion Machinery to be used in Nano Coating Process
Wed, 29 Mar 2006, 15:40:00 GMT — Edited by Carly Zander
TAIPEI, Taiwan - Mar. 29 (SEND2PRESS NEWSWIRE) -- Nano Superlattice Technology Inc. (OTC BB: NSLT - 'Nano'), a company engaged in the coating of tools and components with nano structured PVD coatings for the semiconductor, precision machinery and telecommunications industries, announced today the retainer of automation systems and engineering design services company Festo AG & Co. of Germany to manufacture complex automatic insertion machinery for the nano-coating of client products.

Microsoft Dynamics AX Goes Lean with Production IQ
Thu, 9 Mar 2006, 11:58 EST — Edited by Christopher Laird Simmons
CLEVELAND, OH - Mar. 9 (SEND2PRESS NEWSWIRE) -- Production IQ LLC, a leader in production monitoring and downtime tracking systems, today announced the integration of an industry leading MES system, Production IQ, with Microsoft Corporation's high end ERP package, Dynamics AX.

Kubota Research's P-Wave(TM) ImpacGard(TM) Enhances Composite Impact Resistance
Tue, 28 Feb 2006, 05:14 EST — Edited by Christopher Laird Simmons
HOCKESSIN, DE - Feb. 28 (SEND2PRESS NEWSWIRE) -- Kubota Research Associates, Inc. headquartered in Hockessin, Delaware, has developed a new method to significantly increase the impact and shatter resistance of composite materials, which is easily applied as a post treatment.

Nano Superlattice Technology Inc. Nano-Coating Passes Preliminary Testing by Chi Mei Optoelectronics and Procures Initial Trial Order
Wed, 1 Feb 2006, 11:30 EST — Edited by Christopher Simmons
TAIPEI, Taiwan - Feb. 1 (SEND2PRESS NEWSWIRE) -- Nano Superlattice Technology Inc. (hereinafter "Nano") (OTC Bulletin Board: NSLT), a company engaged in the coating of tools and components with nano structured PVD coatings for the semiconductor, precision machinery and telecommunication industries, announced today that its PVD coatings have passed initial qualifying tests and examinations by Chi Mei Optoelectronics Corp. and has received a preliminary trial order for the coating of two industrial components.

Revere Industries, LLC Announces Combined, Expanded Operations
Wed, 21 Dec 2005, 03:30 EST — Edited by Christopher Simmons
INDIANAPOLIS, IN - Dec. 21 (SEND2PRESS NEWSWIRE) -- A. Elliott Archer, President and CEO of Revere Industries, LLC, announced today that the company has combined selected operations of four of the companies of Charter Oak Capital Partners into a single entity, which will operate as Revere Industries, LLC. The expanded company, financed through CIBC World Markets Corp., includes Metal Powder Products, Ross Aluminum, Revere Aluminum, and selected operating facilities of Titan Plastics Group.

Opti-Sciences Casts a New Light on Automotive Parts Inspection
Tue, 15 Nov 2005, 01:14 EST — Edited by Beverly West
NASHUA, NH - Nov. 15 (SEND2PRESS NEWSWIRE) -- Opti-Sciences, Inc. today announced that a fluorescent measurement method commonly used in the bio-sciences is also effective in detecting manufacturing defects in automotive parts.

Kubota Research and DuPont-Toray Develop Breakthrough Fiber Reinforced Thermoplastic Composite: RUBA(R)-C
Wed, 28 Sep 2005, 11:03 EDT — Edited by Christopher Simmons
HOCKESSIN, DE - September 28 (SEND2PRESS NEWSWIRE) -- Kubota Research Associates, Inc. with headquarters in Hockessin, Delaware and DuPont-Toray Co., Ltd. with headquarters in Tokyo, Japan announce a novel manufacturing method for a fiber reinforced thermoplastic composite without degrading the high tenacity fiber, which is a major revolution in the composite industry. The new prepreg composite and system for its manufacture, including the advanced material components, are exhibiting at the International Plastic Fair (IPF) in Makuhari, Japan, which runs September 24-28, 2005.

ASAME Technology LLC Obtains Exclusive Distribution License for Materials Research and Manufacturing Engineering Tool
Thu, 15 Sep 2005, 05:32 EDT — Edited by Carly Zander
CEDAR PARK, TX - September 15 (SEND2PRESS NEWSWIRE) -- ASAME Technology LLC holds an exclusive license to market, distribute, and support the patented Automated Surface Strain Analysis and Measurement Environment (ASAME). ASAME Technology sells and supports two well-known surface strain measurement technologies: the ASAME Target Model and the Grid Pattern Analyzer (GPA). Currently there are more than 100 ASAME and/or GPA users around the world.

Multiject and Plasdan Team Up in North America
Mon, 22 Aug 2005, 08:09 EDT — Edited by Carly Zander
ROCHESTER, Mich. - August 22 (SEND2PRESS NEWSWIRE) -- Multiject LLC has signed an agreement to represent Plasdan Group, an international supplier of machinery and tooling for the plastic injection molding industry. This relationship is effective immediately, and affects all of Plasdan's injection molding machinery business in North America.

Lokaway USA Introduces the Swing 'n Slide(TM) Safe Door System
Mon, 22 Aug 2005, 11:12 EDT — Edited by Christopher Simmons
LOS ANGELES, Calif. - August 22 (SEND2PRESS NEWSWIRE) -- Lokaway USA has launched the Swing 'n Slide door system. This patented innovation is the most revolutionary idea to be introduced to safe companies in over 40 years. The Swing 'n Slide door system offers a new level of performance, security and reliability for safe customers, and it will offer safe manufacturers a competitive advantage to increase sales, market share and profit.

Nano Superlattice Technology Announces Completion of Nano-coating Mass Production Machinery
Wed, 4 May 2005, 03:28 EST — Edited by Christopher Simmons
TAIPEI, Taiwan - May 4 (SEND2PRESS NEWSWIRE) -- Nano Superlattice Technology Inc. (OTC BB: NSLT), a company engaged in the coating of tools and components with nano structured PVD coatings for the semiconductor, precision machinery and telecommunication industries, announced today the completion of the installation of Nano's newest set of production machinery. The completion of the design and construction of this nano-coating machine is unique and represents the culmination of years of proprietary technology and scientific breakthrough by Nano's research and development team led by Professor Dr. Wolf-Dieter Munz.

City Network Announces Purchase Order from Europe's MCA Technology Inc. for Shipment of New MP3 Product Line
Wed, 4 May 2005, 01:58 EST — Edited by Carly Zander
TAIPEI, Taiwan - May 4 (SEND2PRESS NEWSWIRE) -- City Network, Inc. (Amex: CSN), a company that designs, manufactures and markets a comprehensive line of broadband and wireless Internet access solutions and consumer electronic products, today announced the expansion of the company's marketing initiative in Europe. To accompany the growth in consumers 3C products demand, City Network is aggressively concentrating on the marketing and distribution of products in this trend. Recently, City Network received an official purchase order from MCA Technology Inc. for a version of its MP3 product line.

New HRDT Technology Cuts Development Costs for High Refraction Polymer Optics
Thu, 7 Apr 2005, 12:09 EST — Edited by Carly Zander
PAVILION, NY -- (SEND2PRESS NEWSWIRE) -- Syntec Technologies, a leading manufacturer of custom polymer optics, announces patent-pending HRDT(tm) technology that cuts costs by up to 5X for optics applications requiring high refraction, heat resistant, NIR performance. HRDT, or high refraction diamond turning, enables direct diamond turning of polymers such as Ultem(tm) to a surface as smooth as 60 angstroms, critical in meeting many telecom, defense and biometric performance demands.

By News Article Editor: Christopher L. Simmons
GlobalDie of Maine Announced Today the Acquisition of New Era Die of Pennsylvania
AUBURN, ME - September 8, 2004 /Send2Press Newswire/ -- GlobalDie of Maine (www.globaldie.com) announced today the acquisition of New Era Die, the second acquisition within only 4 weeks. GlobalDie clearly is on an exciting growth course in bringing employment to the area. A clear vision for the future and a focused management team is driving the growth of GlobalDie.

By News Article Editor: Christopher Laird Simmons
Aqua Dyne Inc's JetWater System Ranked Among World's Best Water Purification Technology
BRISBANE, Australia - August 26, 2004 /Send2Press Newswire/ -- Aqua Dyne Inc (OTC:BB AQDY.OB), which specialises in desalination and water purification, has had its JetWater system rated as being one of the world's leading systems in an independent report by international environmental and engineering consultants Maunsell/Metcalf and Eddy, affiliates of the world-wide AECOM group.

By News Article Editor: Carly Zander
Acquisition of Key Competitor Propels Leading Cutting Die Company to the Industry Forefront
AUBURN, ME - August 17, 2004 /Send2Press Newswire/ -- ENEFCO of Maine acquires Industrial Cutting Die of Georgia and forms "GlobalDie" as a new Business Unit. GlobalDie manufactures precision, cost-effective cutting tools for leading companies and converters. With over 25 years of experience, Global Die utilizes the latest technology to custom engineer quality, long lasting tools.

By News Article Editor: Christopher Laird Simmons
Croda Executive Emphasizes Innovation in the Cosmetic and Pharmaceutical Industries
EDISON, N.J. - August 10, 2004 /Send2Press Newswire/ -- Innovation was the major theme at Croda Inc.'s inauguration of its new North American Headquarters and Innovation Center late last month. Croda Inc. (www.crodausa.com) is the North American subsidiary of Croda International PLC, a world-class supplier of specialty chemicals to the cosmetic, toiletries, household, pharmaceutical and manufacturing industries.

By News Article Editor: Carly Zander
Rivet Setting Tool System Invented by an Omaha Man
OMAHA, NE - June 30, 2004 /Send2Press Newswire/ -- ASAR Tool, Incorporated (www.asargroup.com) has developed a tool capable of setting self-tapping rivets, invented by Pepper Aasgaard of Omaha, NE. The new rivet setting tool, which is patent-pending, grips and rotates the self-tapping rivets which cut through sheet metal and fastens in one step. This tool has a potential to save a tremendous amount of time and labor in the sheet metal industry.

By News Article Editor: Carly Zander
Lightweight FaraCages™ Simplify Radio Frequency Protection
RALEIGH, NC - June 25, 2004 /Send2Press Newswire/ -- LBA Technology, Inc. (www.lbagroup.com), a worldwide leader in the manufacture and supply of radio frequency shielding equipment, today announced a new line of lightweight portable Faraday cage enclosures that makes radio frequency protection of electronic equipment more convenient than ever before.

[Business & Technology News Editor: Carly Zander]
Citation Corp. Completes Voluntary Restructuring
BIRMINGHAM, AL - Jan. 6, 2004 /Send2Press Newswire/ -- Citation Corporation (Citation, www.citation.net) announced today that it reached an agreement with its lenders to restructure the company's debt and equity. Affiliates of Kelso & Company, the company's primary shareholders have invested an additional $20 million. The new arrangement provides Citation with additional liquidity by restructuring the current debt service arrangement. In addition, Citation reduced its indebtedness obligations by approximately $116 million as a result of these transactions.
> READ NEWS ARTICLE

[Business News Editor: Christopher Simmons, Senior Editor]
Not-A-Bottle Container System Wins Patent - Provides an Environmentally Superior Package for Flowable Materials
Estes Park, CO - Dec. 1, 2003 /Send2Press Newswire/ -- Rocky Mountain Business Solutions, Inc. (www.RockyBusiness.com) today announced that US Patent 6,651,845 has been issued for their innovative Not-A-Bottle™ container system for flowable materials. Commercial benefits include reduced cost and an environmentally superior package.
> READ NEWS ARTICLE   > PDF